Nvidia’s new 20-series video cards, due to ship next week, will introduce a new overclocking system: Scanner.
Overclocking is typically a trial-and-error process: increase the clock speed, run some intensive workloads to make sure everything works OK, maybe fiddle with the GPU voltage to eke out a bit more stability. Push the clock speed too high, and the system stands a good chance of locking up and crashing. This means that finding the optimal settings can cause lots of rebooting and adjustment. Verifying that the GPU really is stable at a given speed is also a challenge, as not all workloads use all parts of the chip. A given clock speed might be fine for some kinds of software but not others.
Scanner will make this process a lot more automatic and trustworthy. It will run incrementally and increase the clock speed and voltage of the GPU to build a profile of a specific card’s capabilities, testing the GPU’s computing ability at each speed to make sure that it’s operating properly. Generally there will be arithmetic errors, rather than outright crashes, when the GPU is being operated only very slightly faster than it can support. So by making only small adjustments, Scanner can probe the limits of what the chip can handle without the crashes and reboots, and without human intervention. The whole process takes about 20 minutes.
The overclocking performed by Scanner only applies to the GPU; for memory overclocking you’ll need to stick with traditional methods. If you prefer to use those traditional methods for the GPU itself, that’s still going to be possible, too.
Scanner isn’t an application; rather it’s an API. Scanner support will be integrated into the various overclocking apps built and shipped by GPU vendors. At launch, it will support only the new 20-series parts, but support for older chips is expected to ship later.
This is a smart approach to overclocking, so much so that it’s a bit surprising that it’s taken so long to arrive. Nvidia knows how best to induce hot-spots and thermal instability in its chips, so in principle at least, Scanner’s determination that a given speed is stable should be a lot more accurate than the kind of “3DMark runs OK so it’s probably good” testing that end-users normally use. Because it’s automated, Scanner can make smaller incremental changes than a human would, without being overwhelmed by the tedium of the trial and error testing. One wonders if all overclocking software shouldn’t work the same way.
We’ll be giving Scanner a test ourselves to see if it really does make effective overclocking easier; you’ll be able to find out how we got on in our review next Wednesday.
Listing image by Nvidia